Sanitary self-priming pump SZ Series
Thông số kỹ thuật
For the brewery and beverage industry Design Suction and pressure … Đọc tiếp “Sanitary self-priming pump SZ Series”
Thông số chi tiết
For the brewery and beverage industry
Suction and pressure casing made of forged, thickwalled stainless steel, chanelwall inserts and impeller made of investment-cast stainless steel.
A….. on adjustable stainless steel machine feet, stainless steel motor cover,
B….. on adjustable stainless steel machine feet,
C….. on motor foot
D….. on stainless steel foot
DV.. on stainless steel foot incl. stainless steel motor cover
All parts in contact with product correspond to the materials AISI 316L (1.4404) or AISI 304 (1.4301), stainless steel motor lantern, various process seal materials to suit application.
Depending on the application and the product to be pumped single mechanical seal with various sliding materials as well as shaft diameters of 25 – 30 – 35mm and a DIN-standard gland-ring location.
|· Flow rate||: max. 40.000 l/h@50Hz|
|· Discharge head||: max. 30 mWC @50Hz|
|· Motor power||: max. 11 kW|
|· Working temperature||: max. 100°C|
|· Operating pressure||: max. 10 bar|
IEC-standard motor IP 55 hoseproof and with cold
inducters, NEMA-standard motor on request
· vertical or central suction connection
· double mechanical seal with shaft seal ring
· trolley with breaker and cable
· explosion proof EExeIIT3 or EExdeIICT4
· alternative paint for motor (standard RAL 5015)
· casing with drainage connection or diaphragm valve
Connection in diameters from DN 40 up to DN 80 or 2“ up to 3“ according to the following standards: DIN, IDF, Clamp, RJT, SMS, small flanges (other on request).