Bơm cánh khế OMAC BB/BA Series

Developed from the successful existing range of OMAC “B” series pumps, the series “BB-BA” pumps retain the principles of performance, solidity and reliability and incorporate a new design which enables easier cleaning of the wetted parts. BA series has obtained 3A Sanitary Standard certification. Several innovative OMAC features from BF-F series have been incorporated within the  product. BB pumps have design according 3A Sanitary Standard (new standard Number 02-10).

BA pumps have design, surface finish & elastomers in either 3A – FDA approved and are delivered with 3A name-plate and certificate.  Difference between classic B series and BB/BA are:

  • Rotor case profile and geometry allows for complete self draining of the pump with vertical ports

  • In built fixing nuts with flat cover minimises product entrapment & improves CIP

  • Flush end cover O-ring that follows rotor case profile

  • 7KFO mech. seals with bigger and self draining slots to enable through cleaning and also avoids the retention of potentially dangerous cleaning fluid.

All options for the  existing series “B” pumps will be available for the new series “BF” pumps also.

Xem thêm

Bơm cánh khế OMAC – B Series

The B series lobe pumps satisfy most transfer applications to suit hygienic and chemical characteristics. OMAC’S lobe pumps are appreciated all over the world for stoutness and performances, assures good services, long endurance, easy and cheap maintenance.This range consists of 16 models with deliveries from 0.05 to 200 m³/hr with the following versions available: ST Model with standard tolerances, SM Model with increased tolerances, both being made in AISI 316 stainless steel and both available with Duplex shafts. HP Model has crescent shaped rotors in anti-seizure stainless steel alloy with shafts in Duplex for counter pressures up to 20 Bar. The OMAC Lobe Pump is modular in design allowing the main parts such as the rotor and seals, to be changed quickly and easily. A wide range of rotors, seals and gaskets is also available. Traditional Lobe Pumps in AISI 316 stainless steel are assembled on a cast iron gear box which has a protective coating in epoxy paint finish or Nickel plated as option. The chamber separating the rotor case and gear box enables the fitting of balanced compact reversible mechanical seals, avoiding the contamination between the pumped fluid and the gearbox lubricant. The base of the gearbox is designed to make installation easier for connecting into horizontal and vertical pipelines. The OMAC Lobe Pump is modular in design allowing the main parts such as the rotor and seals, to be changed quickly and easily. Quality and high precision working is obtained through having compact and rigid mechanical parts including double conical roller bearings, shafts and oversized gears running in an oil bath within the gearbox.This is to obtain smaller tolerances as the rotors do not have any contact points. This ensures a good pump performance and reliability is obtained. A wide range of seals and gasket is available, material combination can be chosen according to the handled fluid.

Xem thêm